Create an Account - Increase your productivity, customize your experience, and engage in information you care about.
A person may not park a motor vehicle on grass, mulch, or any other surface that is not a paved area.
Show All Answers
Grass and weeds must be maintained at 10 inches or less.
A person may have up to four (4) yard sales per calendar year each lasting a maximum of 3 consecutive days. A permit is required for any additional yard sales.
Yes, you may store 1 unlicensed vehicle on your property provided it is covered with a fitted car cover (not a tarp) and is in good condition.
No, city code strictly prohibits any signs from being posted on utility poles.
Property owners must remove snow and ice from all sidewalks abutting their property within 12 hours after snow has ceased falling.
It is the property owner’s responsibility. Trees and shrubs must be trimmed so that limbs shall not be closer than nine (9) feet above the sidewalk and fifteen (15) feet above any street or alley.
Home occupations are permitted as a conditional use in all R, D, NC, and GC zoning districts provided all use requirements are met. For more information contact Planning at 301-600-1499.
Building permits are required for construction or erection of a structure; construction of an addition to a structure; altering, modifying, or improving a structure; demolishing, moving, or removing a structure; or making a change of use and occupancy classification. If you are unsure if a permit is required, please contact the Building/Permit Department at 301-600-3808.
No, basketball hoops are prohibited from being placed in the public right of way.
Yes, every owner or operator of any building who rents or leases one or more dwelling units must supply heat to the occupants of those units from Oct 1st to May 1st.
Maryland Landlord tenant law prohibits retaliation by a landlord against a tenant. For more information, contact the Frederick County District Court at 301-600-2000.
Maximum occupancy is determined by assessing the square footage of sleeping areas, minimum room sizes, and occupancy loads.